Todos os Produtos
  • HUATEC GROUP CORPORATION
    Prumo
    Tipo da polegada de Astm E114-15 aço carbono 1018 do bloco de teste da calibração Mini Iiw 2
  • HUATEC GROUP CORPORATION
    William
    Tipo da polegada de Astm E114-15 aço carbono 1018 do bloco de teste da calibração Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Tom
    Tipo da polegada de Astm E114-15 aço carbono 1018 do bloco de teste da calibração Mini Iiw 2
  • HUATEC GROUP CORPORATION
    Leão
    Tipo da polegada de Astm E114-15 aço carbono 1018 do bloco de teste da calibração Mini Iiw 2
Pessoa de Contato : Noah
Número de telefone : +8613911115555
Whatsapp : +8613910983110

HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC

  • HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC
  • HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC
  • HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC
  • HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC
Lugar de origem Pequim
Marca HUATEC
Certificação ISO, CE, GOST
Número do modelo HG-808A
Quantidade de ordem mínima 1pcs
Detalhes da embalagem Pacote de exportação padrão
Tempo de entrega 1-4days
Termos de pagamento T/T, PayPal, Western Union
Habilidade da fonte 500 por mês.

Contacte-me para amostras e cupons grátis.

Whatsapp:0086 18588475571

WeChat: 0086 18588475571

Skype: sales10@aixton.com

Se tiver alguma preocupação, fornecemos ajuda online 24 horas por dia.

x
Detalhes do produto
Sensitividade transversal máxima < 5% CASE C-399/99 Comissão aço inoxidável, hermético; isolado do solo
Faixa de medição 50, 100; 150 m/s2 Parâmetro Aceleração, velocidade ou deslocamento
Linha 2 ou 3 linhas 4~20 mA Resistência à carga de saída 0 ~ 500 ohms
Resposta de frequência 5~2000Hz Temperatura de funcionamento (oC) -20~+80
Destacar

portable vibration meter

,

digital vibration meter
Deixe um recado
Descrição de produto

HG-808A Integrated Vibration Transmitter

 

I Brief Introduction

The integrated vibration sensor and transmitter is easy to install on the equipment to be used in conjunction with condition monitoring systems, such as panel meters, DCS, and PLC, etc. It is particularly applicable to monitor online the conditions of important machinery.

The integrated vibration transmitter integrates a shear-mode piezoelectric accelerometer with amplifier, integrator and transmitter to output the RMS value of the vibration acceleration, velocity or displacement (looped power 2-line or 3-line 4-20mA current signal).

 

II Technical Specifications

HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC 0

l Accelerometer:

; Shear-mode Ceramic piezoelectric

; Self-temperature-compensation of sensitivity

; Transverse sensitivity max: <5%

; Case: stainless steel, air-tight

; Ground isolated

; Measurement range: 50, 100; 150 m/s2

l Output:

; Value: True RMS or equivalent peak

; Parameter: Acceleration, velocity or displacement

; Line: 2- or 3-line 4~20mA;

; Optional Dynamic voltage output

; Output load resistance: 0~500 ohm

l Frequency response: 5~2000Hz

l Operating temperature (oC): -20~+80

l Power supply: 20~30Vdc looped

l Connector for cable: (SY)×12k×3P

l Connector direction: side

l Sensor installation: one M8 or M5 or M20

l Size: Ø 40 ×73 mm

l Weight: 370g

III Wiring

 

IV Precautions

1) The sensor must have a close and rigid contact with the item under test, whose surface must be very smooth. The sensor is installed with lock washer.

2) The cable and connector can be pasted with a shield of silicone rubber after being tightened together to prevent them from getting loose.

HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC 1HG-808A Integrated Vibration Transmitter Shear Mode Piezoelectric Panel Meters , DCS , And PLC 2​

Etiquetas:

Medidor de vibração portátil

Medidor de vibração de Digitas