Destacar:
welding x ray machine
, industrial x ray machine
, x ray inspection equipment
320KV Ceramic tube penetrant 40mm Directional Radiographic inspection machine
Main technical parameters
|
ITEM
|
XXG3205 |
| Max Penetration thickness Steel (A3) |
55mm |
| Focal Distance |
600mm |
| Exposure Time |
5min |
| Film Type |
Agfa D7 |
Double lead foil Intensifying screen
|
0.03 |
| Darkroom Disposal |
20±2℃ |
| Development |
5minutes |
| Blackness |
1.5 |
| Input |
Voltage (V) |
220V±10% 50―60Hz |
| Capacity (KVA) |
3.2 |
| Output |
Tube voltage (KVP) |
170-320Kv |
| Tube current (mA) |
5 |
| Stability |
±1% |
|
X-RAY
Tube
|
Focus mm2 |
2.5×2.5 |
| Radiation Angle |
40±5° |
| Sensitivity |
k≤1.8% |
| Operation Mode |
Intermittent operation, Radiating time to cooling time is 1:1 |
|
X-Ray
Controller
|
Dimension |
350×290×160 |
| Weight |
11kg |
| Circuit Structure |
Micro-computer control ,Modular structure,Voice prompt |
|
X-RAY
Generator
|
Cooling |
Force air cooling |
| Insulation |
SF6 Gas Insulation |
| Working Pressure |
0.35Mpa-0.45Mpa |
| Dimension |
335×335×700 |
| Weight (kg) |
43kg |
| Working Temperature |
-10℃―+40℃ |
Standard Delivery
| Directional glass X-ray tube |
1 Pcs |
|
| Generator |
1 Set |
|
| High voltage joins cable |
1 Pcs |
25 Meters |
| Controller |
1 Set |
|
| Power cable |
1 Pcs |
10 Meters |
| Grounding cable |
1 Pcs |
5 Meters |
| Accessories |
1 Set |
|
| (Including: alarm lamp,1 Pcs; lead letter, 1 box; Film dark cassettes 5 pcs; intensifying screen 5 pcs; Wire penetrameter (IQI) 1 set; fuse1 pc) |
System Installation
1.Check and count all goods to be received per the packing list. And then check the quality of the parts for damage,lost and mistake.
2.Keep the controller in a flat,dry and dustless place, switch off the power and connect the power cable.
(Note:
The power supply of the unit is single phase 220V±10% 50-60HZ)
3.If necessary,one end of earth wire can be connected to the earth terminal of the controller and the other end to the special grounding wire.
4.Connect controller to x-ray generator by special 9 cores cable,and form better contact.
5.Check the gas pressure gauge on x-ray generator and make sure it range from 0.35Mpa to 0.45Mpa.If not,the unit is not allowed to turn on so as to avoid any damage to the x-ray generator.
Working Principle
This machine is composed of intelligent controller-ray generator, power cable and connecting cable.
1.The controller will consist of the following sections:
Front Panel: LED display, status and failure indicator, touch keyboards (see the introduction of control panel)
Side Panel: power cable socket and connecting cable socket, power switch,key switch, fuse socket, warning lamp and wire connecting terminal of door-machine interlock.
Internal Circuit: power circuit, rectifying circuit, filter circuit, inverter circuit, control circuit and other circuited.
2.The x-ray generator will consist of the following sections:
X-ray tube, High voltage transformer, Temperature relay, Gas pressure gauge and Cooling fan etc.
3.The schematic diagram of the complete machine:
Optional accessories:
Testing platform, IQI/wire penetrameter, lead letter/digits, lead tape, Cassette, lead screen, personal dosimeter, film viewer, densitometer, film developer, dark room light, RT calibration block etc.
Por favor verifique seu email!
